                                                           File: PATEXAM2.TXT


                    PATRIOT Model System Example 2

            Center for Exposure Assessment Modeling (CEAM)
            U.S. Environmental Protection Agency (U.S. EPA)
               Office of Research and Development (ORD)
            Athens Environmental Research Laboratory (AERL)
                       960 College Station Road
                      Athens, Georgia 30605-2700

                             706/546-3549



-----------------------------------------------------------------------------

NOTE:  The key strokes and commands listed in this example coincide with and
can be automatically executed from within the PATRIOT program with the
interactive log file PATEXAM2.LOG, or they can be executed interactively by
the user by following the sequence listed below.  Refer to the file READ.ME
for further information.


Introduction
~~~~~~~~~~~~
This example is based on first selecting a specific set of soils (e.g.,
hydrologic group A, supporting potatoes, texture class Sandy Loam
or Sand in all layers) then determining where those soils occur.  The area
that contains the largest amount of these soils is then selected as the
geographic area to use.  The pesticide used is Carbofuran and the crop is
potatoes.  A standard run comparing 5 scenarios is performed.

Key Stroke/Command Sequence
~~~~~~~~~~~~~~~~~~~~~~~~~~~
a         Select Analyze
s         Select Soils
d         Select Define
p         Select Property
s         Select Select
<CR>      Press Carriage Return (Enter) to move to Hydrologic Group
          data field
a         Enter hydrologic group for which to search
<CR>      Press Carriage Return (Enter) to move to Ag Only data
          field
x         Press any key to toggle on Ag Only
<CR>      Press Carriage Return (Enter) twice to move to the
<CR>      Crop data field
16        Enter crop number 16 for Potatoes
<CR>      Press Carriage Return (Enter) to move to Parameter field
tc        Enter tc for Texture Class
<CR>      Press Carriage Return (Enter) to move to Layer field
sur       Enter sur for Surface layer
<CR>      Press Carriage Return (Enter) to move to Minimum field
4         Enter 4 to look for Sandy Loams
<CR>      Press Carriage Return (Enter) to move to Maximum field
5         Enter 5 to look for Sands
<CR>      Press Carriage Return (Enter) 3 times to move to
<CR>      2nd row of parameter specifications
<CR>
tc        Enter tc for Texture Class
<CR>      Press Carriage Return (Enter) to move to Layer field
sub       Enter sub for Subsurface layer
<CR>      Press Carriage Return (Enter) to move to Minimum field
4         Enter 4 to look for Sandy Loams
<CR>      Press Carriage Return (Enter) to move to Maximum field
5         Enter 5 to look for Sands
<CR>      Press Carriage Return (Enter) 3 times to move to
<CR>      3rd row of parameter specifications
<CR>
tc        Enter tc for Texture Class
<CR>      Press Carriage Return (Enter) to move to Layer field
str       Enter str for Substratum layer
<CR>      Press Carriage Return (Enter) to move to Minimum field
4         Enter 4 to look for Sandy Loams
<CR>      Press Carriage Return (Enter) to move to Maximum field
5         Enter 5 to look for Sands
<CR>      Press Carriage Return (Enter) 3 times to move to
<CR>      4th row of parameter specifications
<CR>
tc        Enter tc for Texture Class
<CR>      Press Carriage Return (Enter) to move to Layer field
sst       Enter sst for below Substratum layer
<CR>      Press Carriage Return (Enter) to move to Minimum field
4         Enter 4 to look for Sandy Loams
<CR>      Press Carriage Return (Enter) to move to Maximum field
5         Enter 5 to look for Sands
F2        Press F2 to Accept search specifications
r         Select Return
f         Select Find
F2        Press F2 when done viewing search results (26 soils)
r         Select Return
g         Select Geographic
f         Select Find
F2        Press F2 to Accept defaults for search (Subset soils,
          MLRA coverage)
F2        Press F2 when done viewing search results (26 soils)
o         Select Order
F2        Press F2 to Accept Order defaults
s         Select Summarize
F2        Press F2 to send summary to screen
F2        Press F2 when done viewing summary (note 007 has largest
          area)
d         Select Define
ref       Select Refine
007       Enter MLRA 007 as it contained the largest area
F2        Press F2 to select 007 as only area to search
F4        Press F4 to Previous out of Refine screen
ret       Select RETurn
f         Select Find
F2        Press F2 to Accept default search specifications
F2        Press F2 when done viewing search results (5 soils found)
m         Select Map
F2        Press F2 to Accept mapping defaults
<CR>      Press Carriage Return (Enter) when done viewing map
r         Select Return
i         Select Infiltration
c         Select Choose
<dn-arr>  Press down arrow to highlight 2nd station (Pendleton, OR)
F2        Press F2 to Accept 2nd station as station to use
r         Select Return
p         Select Pesticide
n         Select Name
carbof    Enter enough of Carbofuran to get a unique match
F2        Press F2 to Accept
r         Select Return
c         Select Cropping
d         Select Define
potat     Enter potat to search for Potatoes
F2        Press F2 to Accept
f         Select Find
s         Select Summarize
F2        Press F2 to send summary to screen
F2        Press F2 when done viewing summary
r         Select Return
w         Select Worksheet
F2        Press F2 to Accept worksheet defaults
F2        Press F2 when done viewing Worksheet message
r         Select Return
i         Select Input
t         Select Type
x         Press any key to toggle on Standard type run
<CR>      Press Carriage Return (Enter) twice to move to
<CR>      Starting Year data field
1977      Enter staring year (year prior to max year)
<CR>      Press Carriage Return (Enter) to move to Ending Year
          field
1978      Enter ending year (max year)
F2        Press F2 to Accept values
o         Select Overview
F2        Press F2 to page through the 5 scenarios
F2        (or use Interrupt, F6, to stop paging)
F2
F2
F2
F2
r         Select Return
e         Select Estimate
e         Select Execute
m         Select Unit
F2        Press F2 to Accept defaults
<CR>      Press Carriage Return (Enter) when done viewing plot
w         Select Weighted
F2        Press F2 to Accept defaults
<CR>      Press Carriage Return (Enter) when done viewing plot
r         Select Return
r         Select Return
