$Id: 11142003 | Jae Yoon <yoon@cee.odu.edu>
------------------------------------------------

How to Run Qual2Eu under Windows NT/2000
------------------------------------------------

Yes, it is a bit weird behavioral pattern of QUAL2EU under NT/2000, 
I'd admit. Normal 'Run' procedure in Windows interface would not 
not create the *.out and *.dou files that you're looking for.  

To obviate such problems, modifications were made.  
Please do;

1) Download the installation zip file and unzip to install
QAUL2EU.  Make it sure to configure environmental parameters 
correctly -- see "Installation Guide for QUAL2EU for 
MS Windows NT & 2000" file for further detail.

2) Use the QUAL2EU windows interface to fill in the parameters 
and generate stream configuration (i.e., go through each 
parameter screen by clicking on 'Next' button.

3) Once you see the 
"End of QUAL2E input screes! Press Run to execute the input values, 
if desired." message box, click on 'Run' button.
This will create the qual2e input file, *.run based on 
QUAL2E project stub file (*.inp).

4) Do not click on 'Ok' buttom in 
"Do you want to see output..." message box.  Click on 'Cancel' and 
close the message box.

5) Open a DOS window (=command prompt), change to %Q2edir% directory
(= your QUAL2E installation root directory).

6) Locate GO_E.BAT (for Enhanced QUAL2 analysis) 
or GO_U.BAT (for Uncertainty analysis) and manually run 
*.run file [from command prompt].  (i.e., GO_E QAL2Eabc.RUN)
This will create the *.out and *.dou output files along with *.par 
and a couple of other files.

7) Once you run above step successfully, 
return to the QUAL2EU windows interface. Use 'Utilies' menu to generate 
and view graphic output.  Output data can be view by opening *out file
in your text editor.

8) You can again open another QUAL2E project *.inp files. 
You should be able to directly see the *.out file and use the graphics 
to view and plot results.